Decided to build a new 5 inch build. I went with my own DLQ Daddy 5 Frame as the base. 226mm, 3,4,5 pythagorean motor to motor configuration, split base plate. 2.5mm lower and mid plates. 4.5mm arms, 2mm top and camera plates. supports full size FPV cameras 30.5x30.5 and 20x20 as well as a second 20x20 in rear. message or leave a comment if you are interested in getting one for yourself. i may make a small limited run for dlqfpv.com
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
frame weight??
It's not light. Around 130-135g with 12.9 steel hardware. Could probably shave a few grams off using aluminum.