Schwifty

By md1609 on Jan 08, 2020

13  257  1

This is my custom carbon-cut 2.5" stretch frame. I designed the frame after I flew my Nidici Black Pearl 5" stretch and loved it. I wanted a small park ripper and this thing is awesome! The frame has multiple mounting points for different cameras, as well as different mounting patters for different flight controllers. It can handle 16x16 and 20x20 stacks, as well as a diamond FC similar to the mobula7 board if you use the adapter plate. The bottom plate carbon is 2mm thick and the top plate is 1mm. It's AUW is 110 grams with a 2s 450 mAh battery.

Photos

Discussion

Sign in to comment

ꓘamiKwadze   Apr 28, 2020  

Sweet build, must be quick as hell.

Guides & Reviews

39 3,793  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,654  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more