Armattan Chameleon Ti 7" Long Range

By Jon FPV on Jan 10, 2020

8  278  0

Armattan Chameleon 7" Long Range build

Started using a Mamba F7 FC but replaced it later with a Matek F722 SE.

Maximum range tested of 2km (1,24 miles) with perfect video, using the Immersion Rapidfire with Lumenier AX II Patch and the Foxeer Pagoda Pro. TBS Unify Pro was set to 25mW in an open area and flying at an altitude of around 40m (130 feet). Must make more tests in order to find out the maximum video range with the 5.8 GHz setup.

Video setup is going to be replaced with a 2.4 GHz one to get more range, so I only get limited by batteries duration.

Antenna for TBS Micro TX was an Immortal T in the initial setup, but replaced it with an Immortal T extra extended (longer wire) later so I could set it in a vertical position.

Holder for Immortal-T and Runcam 5 has been designed by myself and printed in TPU.

Part List


Chameleon Ti LR 7 inch - Armattan Quads

Flight Controller

Matek F722-SE F7 30x30 Flight Controller w/ 5V BEC , Video Power Switcher, Dual Camera Image Switcher (31 builds)

Flight Controller

MAMBA F722S 3-6S 5V 2A & 9V 2A BEC OSD 2812 LED Flight Controller 30.5x30.5mm for RC Drone FPV Racing


MAMBA F50Pro 50A 3-6S Dshot1200 4 IN 1 Blheli_32 Brushless ESC 30.5x30.5mm for RC Drone FPV Racing (4 builds)


4 x Racerstar & T-Motor F40 Pro 2306 1600KV 3-6S / 2400KV 3-4S Brushless Motor for RC Drone FPV Racing


2 Pairs Gemfan Flash 7040 7 Inch Long Range 3-Blade Propeller Support POPO for RC Drone FPV Racing (2 builds)

FPV Camera

RunCam Eagle 2 Pro Global WDR OSD Audio 800TVL CMOS FOV 170 Degree 16:9/4:3 Switchable FPV Camera (42 builds)

FPV Transmitter



Batería Tattu Fun Fly 1300 mAh 14.8V 100C 4S1P - Iha Race (5 builds)


Lumenier AXII 2 5.8GHz Long Range SMA Antenna - RHCP or LHCP (44 builds)


TBS Crossfire Micro RX V2


2Pcs URUAV 14.8V 2200mAh 70C 4S Lipo Battery XT60 Plug for Eachine Fury Wing Airplane Feilun FT011 (2 builds)


FrSky 2.4G 16CH Taranis X9D Plus Transmitter SPECIAL EDITION w/ M9 Gimbals (48 builds)


FatShark Dominator HDO 4:3 OLED Display FPV Video Goggles 960x720 for RC Drone (108 builds)

HD Camera

RunCam 5 12MP 56g Smallest 4K Cam HD Recording 145 Degree NTSC/PAL 16:9/4:3 Switchable FPV Action Camera Bulit-in Battery for RC (16 builds)

Misc Parts

Matek Systems M8Q-5883 SAM-M8Q GPS & QMC5883L Compass Module for RC Drone FPV Racing (7 builds)

Misc Parts

New Vifly Finder 2 5V Super Loud Buzzer Tracker Over 100dB w/ Battery & LED Self-power for RC Drone (17 builds)

Video Receiver

ImmersionRC RapidFIRE w/ Analog PLUS Goggle FPV Receiver Diversity Module (129 builds)

Video Receiver

FuriousFPV TrueD-X 2.4 GHz Diversity Receiver System Clarity Redefined for Fatshark HD O Dominator V1 V2 V3 FPV Goggles

Radio Module

TBS Crossfire TX (11 builds)

Battery Charger

Batería Tattu Fun Fly 1300 mAh 14.8V 100C 4S1P - Iha Race (5 builds)

Soldering Iron

JBC 14ST Soldering iron, 230V - 2192040

Soldering Iron

SOLDADOR JBC 65S 32W PUNTA LD 3652040 ST - Soldador JBC
See Site


Creality3D Ender-3 pro High Precision 3D Printer (3 builds)


Quad PITSTOP Backpack PRO | Torvol (5 builds)


X²-AIR 2.4 - TrueRC Canada


ImmersionRC RF Power Meter v2


Foxeer Pagoda Pro 5.8GHz 2dBi RHCP FPV Antenna 86mm SMA/RP-SMA Black/Red/Orange (20 builds)


FuriousFPV Dock-King Ground StationSKU: FPV-DOCK


FuriousFPV - Smart Power Case V2SKU: FPV-0384V2-S


Lumenier AXII Patch Antenna 5.8GHz 8.4dBi FPV Antenna LHCP/RHCP SMA/RP-SMA For FPV RC Drone


TBS Diamond Antenna (24 builds)


FuriousFPV 2.4GHz 8.6dBi Two Slices PATCH FPV Antenna LHCP/RHCP for RC Drone


2PCS INR18650-30Q 3000mah 20A Flat Top Protected Power 18650 Li-ion Battery for Samsung (8 builds)
Show stores (12)


Sign in to comment

Guides & Reviews

27 2,311  31
25 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,904  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more