Top mount 65mm Ultralight Toothpick (DVR), monocoque bonded carbon frame for ultimate lightweight, ultra aerodynamic skinny arms with unobstructed air flow, weight balanced on all axes, optimized antenna and wire management, camera tilt calibration.
AUW 75.4g including Buzzer, LEDs, AXii & DVR
Flight Controller |
NamelessRC AIO F4 12A 2S-4S Flight Controller
(2 builds)
Airbladeuav.com
|
$36.99 |
Motors |
4 x AMAXinno 1103 7500KV 1-2S Brushless Motor for RC Drone FPV Racing 3.8g
(14 builds)
Banggood.com
|
$45.84 |
Propellers |
HQ Prop Durable Prop T65MM (5CW+5CCW)-Poly Carbonate
(30 builds)
Pyrodrone.com
|
$2.99 |
FPV Camera |
RunCam Nano2
(184 builds)
Pyrodrone.com
|
$19.99 |
Antenna |
Lumenier Micro AXII Shorty U.FL 5.8GHz Antenna (RHCP)
(36 builds)
Pyrodrone.com
|
$19.99 |
Receiver |
FrSky XM+ Micro SBUS Receiver (International firmware)
(1149 builds)
Dronejunkie.co.uk
|
See Site |
Batteries |
Gaoneng GNB 7.4V 2S 450MAH 80C Lipo Battery XT30 Plug
(47 builds)
Banggood.com
|
$8.99 |
This looks so goood!! how does the front and back assemble tho thats so clean that i wasnt sure it was possible. Also wowww 75grams!! thats REALLY light for a topmount!
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
where can I buy this frame!? This thing is amazing!
Hi Nate, the frame isn't for sale, its something I designed about a year ago and I had cut at CNC-madness