Unikorn Racer
By MacDaddy FPV on Feb 27, 2020
This is my second build and my first racer. Bought the Bushfire edition to help with money towards the fire affected here in Aus. It was a challenging build for me as it was quite tight. I ended up going with some taller stand offs so there was room to fit the vtx and so I could elevate the stack so the camera plug was not up against it. In future I would go with a camera that has solder points rather than a plug. I have used cheap motors for now but I will likely upgrade them in the future. Because I raised it up, the antenna mount which usually hangs off the back of the top plate was fouling the props so I moved it onto one of the arms.
Part List
Show stores (7)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for MacDaddy FPV