This build was my first build that I decided parts on. I got the XINGs on sale and just went for a whole build to be my first DJI quad.
I used XING 2207 2450KV Motors.
I fried the flight stack that I originally tried, as it was 20x20 and I soft mounted it too much moving to 30x30.
Also make note that on this frame the battery cable has to come up through the front, so you need to mount your ESC backwards. If you use another stack it may not come with an ESC/FC cable the reaches across, and the air unit connector was too short to run that one farther.
Note: I ordered the DJI Transmitter but it is backordered so I threw an XM on there to fly until then.
Photos
Part List
Show stores (7)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for Itsblunty