4, 5 or 6s! Plug in and Fly - Reverb w ETHIX Cats

By maplechill on Feb 02, 2020

7  333  1

Another customer build set up with voltage sensing. It will auto select the correct profile so you can plug in a 4, 5 or 6s battery and send it! Also running RPM filters with Dshot 600 and 8k/4k looptimes thanks to the F7 processor.

Slipped the motor wire covers over the CLRacing LEDs for a nice neat look and some extra protection. I had to keep it murdered out so the Runcam Eagle 2 Pro got a few coats of black spray paint.



Sign in to comment

borg_clan2   15 days ago  

Hi, Quick question how have you got on with the Diatone F722s F50? I have the new F722s F60 Pro on route using the same motors and very similar build but using the Apex frame. Whilst the motor draw is around 40A hoping the 60A ESC board will not fry the motors

Guides & Reviews

39 3,761  46
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,630  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more