220X R - All The Things

By veocon on Jan 24, 2017

0  235  0

List of my gear

Part List


Limited Time Offer - Formula 220X Racer (33 builds)

Flight Controller

Raceflight Revolt V3 Flight Controller - Latest Version (70 builds)


4 x MRM Zeus D 20 Amp BLHELI_S ESC


5 x eMax RS2205S 2300KV Brushless Motor (2 builds)


10 x 5" Double Blade Propellers 5038DCS (Double Crane Style) (26 builds)

FPV Camera

Foxeer Sony CCD Arrow V3 Cam w/OSD and Audio

FPV Transmitter

TBS Unify Pro 5G8 V3 (RP-SMA) (101 builds)


TBS Triumph 5.8 GHz Antenna - SMA (539 builds)


FrSky X4R-SB - 3/16 CHANNEL RECEIVER WITH SBUS (11 builds)


5 x 30 AMP Simonk 30A Brushless ESC firmware w / 5V 3A UBEC Quad Multirotor APM2 1G7 4894462326060 (68 builds)


8 x FPV Ninjas 1550mAh GRAPHENE 4S 80C Lipo Battery

Power Distribution

Mini PDB 5v/12v w LC Filter


Turnigy Evolution Digital AFHDS 2A Radio Control System w/TGY-iA6C Receiver White Mode 2 (11 builds)

HD Camera

RunCam 3 64G HD 1080p/60fps NTSC/PAL 155 Degree Wide Angle WiFi FPV Camera (28 builds)

Misc Parts

Duplex 2x50W LCD Charger (US)

Misc Parts

4 x RunCam RC21/RC23/RC25 FPV Lens 2.1mm/2.3mm/2.5mm FOV 165/150/130 Degree Wide Angle for Swift Swift2 Mini

Misc Parts

Eachine E010S 65mm Micro FPV Racing Quadcopter with 800TVL CMOS Based On F3 Brush Flight Controller

Misc Parts

Fat Shark Dominator V3 FPV Goggles (56 builds)

Misc Parts

RMRC Battery Voltage Tester - With Audio Alarm LiPo 1-8s

Misc Parts


Misc Parts

MRM Micro PDB with 5v and 12v BEC – MultiRotorMania (13 builds)

Misc Parts

STRIX Power Stix Lithium Ion Goggle Battery - 7.4v 3200mah

Misc Parts

Diopter Sets For FatShark Goggles For Vision Correction #1601

Misc Parts

EMAX Pagoda Antenna RHCP Set of 2 - 50mm and 80mm (62 builds)

Misc Parts

2 x Menace RC - Raptor Antenna

Misc Parts

FrSky Taranis Q X7 Digital Telemetry Radio System 2.4GHz ACCST (Black-no plugs) (Standard Version)
Show stores (14)


Sign in to comment

Guides & Reviews

29 2,575  33
30 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,988  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more