Lumenier QAV R-2 HD 6S

By CTowne411 on Feb 15, 2020

11 626 8

Here is my 2019 winter HD 6S build..

This was my take on an HD 6S drone made around freestyle flying.
Built around the DJI Digital FPV System.
Fun quick build, flies very smooth, overall very happy with it.

The Kakute F7 HDV and Tekko 32 F3 HDV combo stack made this so simple and clean.
Highly recommend this stack for DJI setups.

Batteries are 6S 1300Mah 100C

The total build weight is 410g, No battery

Photos

Part List

Frame	Lumenier QAV-R 2 Freestyle Quadcopter Frame (19 builds) Getfpv.com	See Site
Flight Controller	HolyBro Kakute F7 HDV - Tekko32 F3 HDV 4-in-1 40A ESC Stack (12 builds) Getfpv.com	$92.99
Motors	4 x iFlight XING Camo X2207 Motor (18 builds) Getfpv.com	$95.96
Propellers	Lumenier 5x5.3x3 - Gate Breaker Propeller (Set of 4 - Transparent Blue) (10 builds) Getfpv.com	$3.99
FPV Camera	Caddx DJI Digital HD FPV Air Unit Kit (288 builds) Getfpv.com	See Site
3D Printed	Lumenier QAV-R 2 Soft Mount Arm Guards (Set of 4 - Black) (3 builds) Getfpv.com	$9.99
3D Printed	Lumenier QAV-R 2 DJI Tray Mount Getfpv.com	$5.99
3D Printed	2 x Lumenier QAV-R 2 DJI Antenna Mount (2 builds) Getfpv.com	$9.98
3D Printed	Lumenier QAV-R 2 DJI XT60 Harness Mount (2 builds) Getfpv.com	$3.99
Misc Parts	20 Pcs M3 Aluminum Standoff Column Spacer for RC Multirotors (35mm, Black) (3 builds) Amazon.com	$8.60
Misc Parts	Universal FPV Camera Mounts 4pcs (Rubber 5mm) Getfpv.com	$4.99

Show stores (2)

Like Copy Part List Follow CTowne411

Discussion

Friiidge Jun 30, 2020

Hello,

Is it possible to receive STL FIles??
There are really nice!

CTowne411 Jul 14, 2020

All 3D printed parts in this build were purchased from GetFPV

Trysk May 13, 2020

Hi, i'm planning to build the slam version of the frame. Do you think is possible to put the dji air unit in the back? Is there enough space?

CTowne411 May 16, 2020

I would say no there is not enough room, on the normal version of the QAV-R frame the dji air unit is longer then the allotted frame space in the rear bay of the frame.

Trysk May 16, 2020

Thanks

artfilm May 08, 2020

Is that a 30x30 stack with the DJI air unit on top of it? Did that all fit with 28mm standoffs or did you have to get new standoffs for that? Looks really cool though!

CTowne411 May 08, 2020

Yes that is correct, the standoffs are in the parts listing

CTowne411 May 09, 2020

new taller ones, were needed to make it fit

Guides & Reviews

109 22,060 39

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

67 17,609 64

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews