Hyperlite Floss 3.0 Lite 6S

By Buzzin G FPV on Feb 20, 2020

14  384  2

Hyperlite Floss 3.0 Lite 6S

Fresh build for the 2020 race season

Dry Weight: 279g
All Up Weight: 492g

Photos

Part List

Frame

Hyperlite Floss 3.0 LITE Race Frame 5"
Drone-fpv-racer.com
$60.36

Flight Controller

HelioRC SPRING IMU-F Mini Flight Controller (20x20) (2 builds)
Shop.brickracing.com
$39.90

ESCs

Aikon AK32PIN 4in1 35A 6S (4 builds)
Drone-fpv-racer.com
$69.67

Motors

4 x T-Motor F60 PRO IV - 1950Kv
Drone-fpv-racer.com
$125.16

Propellers

GEMFAN 51466-3 Hurricane - MCK - 4pcs
Drone-fpv-racer.com
$3.48

FPV Camera

Foxeer Predator Micro V4 (2 builds)
Drone-fpv-racer.com
$46.41

FPV Transmitter

TBS Unify Pro Nano 5.8g
Drone-fpv-racer.com
$29.02

Antenna

Lumenier AXII 2 Stubby 5.8GHz Antenna (RHCP)
Drone-fpv-racer.com
$25.47

Receiver

TBS Crossfire Nano RX (2 builds)
Drone-fpv-racer.com
$37.10

Batteries

AHTECH Infinity RS Force V2 1150mah 120C 6S Lipo Battery
Getfpv.com
$29.99
Show stores (3)

Discussion

Sign in to comment

drumdude0   Feb 24, 2020  
1

Nice, very well put together. What's the rx/vtx board?

Buzzin G FPV   Feb 24, 2020 

thanks buddy, the board came with the Unify Nano, Unify and Crossfire nano solder directly onto it. it's 20x20 but holes only M2 I had to drill out to M3. whitenoise also have similar boards

Guides & Reviews

59 4,722  48
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,687  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more