7" TBS Source One v0.2... "Funny Bones."

By FlipMasters FPV on Feb 24, 2020

8  336  4

(Update) 7" TBS Source One v0.2...
Name: "Funny Bones."

(UPDATED APRIL 2020) I rebuilt Funny Bones to have a more normal look and feel to it. It worked okay, but had issues with the GoPro in the front. From the older photos, not much has changed. Taped over the wire meshes, removed the rear FPV cam, and removed the captains chair and replaced with a normal GoPro TPU mount... (see newly added photos)

I modeled this build after "The Joker generations" (which you can see the design I made for a decal or hydro dip for the quad in the photos).

This build from start to rebuild. With the GoPro and battery, it weighs at 1051 grams, w/o the GoPro and battery, it weighs right at 569 grams. (current rebuild weights)

Funny Bone has a total of 3 cameras normally, the FPV camera, the GoPro Hero 7, and a GoPro session for recording rear facing footage, and it works awesome!!

The motors, the 4 - KO Technologies Demon Seeds are 2407 1750kv 6s. These are actaully "Prototypes." I got them from KO Technologies and they price the same as the 2208 1750kv's. So, I priced the motors with the pricing information from TBS...
(I have 4 main motors and 2 spare motors)

Rebuild maiden flight video here:

Thanks guys!

Photos

Part List

Frame

TBS Source One 5" Frame V3 (91 builds)
Getfpv.com
$26.99

Frame

TBS Source One V0.2 7inch Arm Set (7 builds)
Team-blacksheep.com
$20.25

Flight Controller

BrainFPV RADIX Flight Controller (Custom Graphical OSD, Baro, Stackable) (99 builds)
Getfpv.com
$55.99

ESCs

Hobbywing XRotor Micro 60A 6S 4-in-1 BLHeli32 ESC (29 builds)
Getfpv.com
$69.99

Motors

4 x KO Demon Seed 2208 1750kv - Red (3 builds)
Team-blacksheep.com
$107.96

Propellers

2 Pairs DALPROP CYCLONE T7056C 7inch Crystal 3-blade Propeller for RC FPV Racing Drone (11 builds)
Banggood.com
$4.16

Propellers

2 x RS-3blade-FPV - 6x4.5 Prop Set x4 Green
Masterairscrew.com
$7.98

Propellers

2 x HQProp 7x3.5x3 V1S Propeller (Set of 4) (7 builds)
Airbladeuav.com
$7.98

FPV Camera

Foxeer Toothless 1200TVL 1/2" Sensor Micro FPV Camera (3 builds)
Getfpv.com
$34.99

FPV Transmitter

TBS Unify Pro32 HV 5.8GHz Video Transmitter (MMCX) (60 builds)
Getfpv.com
$49.95

Antenna

Lumenier AXII 2 Long Range 5.8GHz Antenna (RHCP) (4 builds)
Getfpv.com
$19.99

Receiver

TBS Crossfire Diversity Nano RX - FPV Long Range Drone Receiver (42 builds)
Team-blacksheep.com
$59.95

Batteries

Pyrodrone Graphene 2200mAh 6S 22.25V 75C (4 builds)
Pyrodrone.com
$44.99

Radio

FrSky Taranis X9D Plus 2019 ACCESS w/ X8R 16CH Receiver - Silver
Getfpv.com
$224.99

Radio

2 x FrSky M9 Hall Sensor Gimbal for Taranis X9D / X9D PlusDefault Title (2 builds)
Racedayquads.com
$39.98

Goggles

Fat Shark Dominator V3 FPV Goggles (56 builds)
Getfpv.com
$299.99

3D Printed

TBS Source One Accessory Kit (7 builds)
Brain3d.co
$32.00

HD Camera

GoPro HERO7 Black + (1) microSD Card
Amazon.com
$324.48

Hardware

2 x Screw Round Head Hex M3 x 6mm 7075 Aluminium Green (10pcs)
Hobbyking.com
$6.44

Hardware

Screw Round Head Hex M3 x 10mm 7075 Aluminium Green (10pcs)
Hobbyking.com
$3.22

Hardware

O-ring Kit 3mm (Neon Green) (10pcs/bag)
Hobbyking.com
$0.52

Misc Parts

Small QQ Battery Straps - Set of 3 - Quad Questions
Quadquestions.com
$6.49

Misc Parts

2 x Team BlackSheep TBS Crossfire Immortal T Antenna V2 (14 builds)
Airbladeuav.com
$11.98

Misc Parts

Lumenier M5 Red Aluminum Low Profile Lock Nut (set of 4 CW)
Getfpv.com
$4.99

Misc Parts

M5 Green Aluminum Flange Lock Nut (set of 4)
Getfpv.com
$4.99

Misc Parts

TBS M8 GPS Glonass (12 builds)
Team-blacksheep.com
$10.50

Video Receiver

TrueRC X-Air 5.8GHz SMA Receiver Antenna - RHCP or LHCP (2 builds)
Racedayquads.com
$24.99

Video Receiver

Video Aerial Systems VAS ION V2 5.8GHz SMA Antenna - RHCP or LHCP (11 builds)
Racedayquads.com
$16.99

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (129 builds)
Getfpv.com
$149.99

Radio Module

TBS Crossfire TX LITE - Long Range R/C Transmitter (24 builds)
Team-blacksheep.com
$149.95

Battery Charger

HTRC LiPo Charger RC Battery Balance Discharger 150W 10A 1-6S AC/DC C150 for NiCd Li-ion Life NiMH LiHV PB Smart Battery (White)
Amazon.com
$54.99

Soldering Iron

NovelLife 65W Mini TS100 Electric Soldering Iron Kit,Adjustable Temperature,Programmable STM32 Chip,Digital OLED Screen Display (2 builds)
Amazon.com
$69.99

Tools

TBS Sexy Driver Kit
Team-blacksheep.com
$12.95

Backpack

ReadyMan Gray Man Bag
Readyman.com
$64.99

Accessories

SkywardRC Fat Cable Two w/ Switch - Regulated FatShark Power Cable - XT60 & JST-XH (2 builds)
Racedayquads.com
$29.99

Accessories

TBS Diamond Antenna (25 builds)
Getfpv.com
$24.95

Accessories

iFlight 2 Set FPV Drone Lock Mount for Backpack Plug-in Accessories DIY Bundle Mount Hanging Buckle with 4pcs Battery Straps 20X (3 builds)
Amazon.com
$10.99

Misc Supplies

Kaisi S-130 Insulation Silicone Soldering Mat Repair Mat, Heat Resistant Silicone Work Mat 932°F with Scale Ruler and Screw
Amazon.com
$8.99

Misc Supplies

LingSY 2 in 1 RC Lipo Battery Monitor Alarm Tester Checker Low Voltage Buzzer Alarm with LED Indicator for 1-8S Lipo Life LiMn L
Amazon.com
$8.98

Misc Supplies

Mxfans Black Aluminium Alloy Neck Strap Balancer with 4 Holes for JR Transmitter
Amazon.com
$7.85

Misc Supplies

Aven 17530 Soldering Stand with Soft Coiled Tip Cleaner
Amazon.com
$7.37

Misc Supplies

RDQ Quad Solder V2 - 63/37, 0.8mm, 100g
Racedayquads.com
$6.99

Misc Supplies

Smoke Stopper (XT60) by RDQ and BengineeringLabs - Modern LED (10 builds)
Racedayquads.com
$6.95

Misc Supplies

KOTTO Third Hand Soldering PCB Holder Tool Six Arms Helping Hands Crafts Workshop Helping Station Non-Slip Aluminum Base Wire Cu
Amazon.com
$24.99

Misc Supplies

Lumenier Mini Nut Wrench Tool
Getfpv.com
$12.99
Show stores (12)

Discussion

Sign in to comment

FlipMasters FPV   29 days ago  

Did a rebuild in April 2020 on this one...Hope you guys like it! Cheers! 🍻

sergetania   Feb 25, 2020  
1

This is a flying fortress of cinedrones! No enemy will escape unfilmed! But it has a blind spot on the bottom! 😉

FlipMasters FPV   Feb 25, 2020 

the small mount under the quad is a hero session mount. I could turn it around and then cover all points? haha

FlipMasters FPV   29 days ago 
1

I rebuilt this bad boy :)

Guides & Reviews

28 2,463  33
28 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,963  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more