This is a Mach build. i might use the r9 on this as well as a rush vtx 20x20. Make this a long range build.
Frame |
Project #MicroLongRange by Dave_C_FPV
(11 builds)
Thingiverse.com
|
See Site |
Flight Controller |
FLYWOO GOKU F411 Micro Stack FC&BS13A ESC&VTX625 2-4S Flytower FPV Combo 16*16mm Mounting Hole
Usa.banggood.com
|
$52.50 |
Motors |
iFlight XING X1404 3800KV Motors for FPV Toothpick Ultralight Build Drone Pack of 4
(2 builds)
Amazon.com
|
$65.99 |
Propellers |
HQ Prop Durable T4x2.5 Bi-Blade 4" Prop 4 Pack
(26 builds)
Racedayquads.com
|
$2.99 |
FPV Camera |
Runcam Phoenix Oscar Edition - 1000TVL CMOS FPV Camera
(7 builds)
Getfpv.com
|
$34.99 |
FPV Transmitter |
FPV Drone Video Receiver Antennas for - Race Day Quads
(59 builds)
Racedayquads.com
|
$2.99 |
Antenna |
TBS Triumph Pro (U.FL RHCP)
(32 builds)
Pyrodrone.com
|
$19.95 |
Receiver |
TBS CROSSFIRE NANO RX (SE) - FPV LONG RANGE DRONE RECEIVER
(412 builds)
Team-blacksheep.com
|
$29.95 |
Batteries |
Gaoneng 11.4V 1100Mah 50C 3S HV 4.35V Lipo Battery XT30 Plug for RC Drone
(2 builds)
Usa.banggood.com
|
$16.14 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
pictures 2 and 3 are clearly not of the nano reciever ...please update the photos vrs parts listed as im having trouble figuring out if reciever uart rx and transmitter wires connect to stack uart 1 middle pin or last pin for the reciever to read stick movment.i see 5 open pins on the tiny stack and connected 1pin blk 2 pin red(positive)3pin I skipped and 4pin rx followed by 5pin transmit,on betaflight I set my reciever as tbs crossfire but get no stick movement in the controller tab?please post pictures of the wireing diagram.