TBS Flyspeck 110

By daich on Mar 06, 2020

18  1,113  4

This is a TBS/Lil Deuce collaboration frame.
Picked up this used build for a song...so technically not my build but I have taken it apart and put it back together.
3" props fit perfectly on this frame. Too bad the frame is cut cross grain so it is really flexible. I believe the original Lil' Deuce is cut a long the grain which would makes a significant difference at such sizes.
What is really interesting is TBS 5g8 Micro antenna that sticks onto it's designated spot on the canopy. They should have also made a spot for a crossfire race antenna!
Just like previous two other runcam nano 2 cameras, this one worked for about 5 minutes on the bench when I was setting it up and then it died. Has anyone else experienced this? I previously thought maybe my FC was outputing more than 5v but I checked it wasn't. That means out of the 4 nano 2s that Ive owned, only one is working normally. That's pretty bad QC. Two were ordered at once and then another two completely separate times.
Now I have caddx eos 2 4:3 in there...let's hope there are not specks on the sensor :stuck_out_tongue_winking_eye:



Part List


TBS FlySpeck Frame Kit (5 builds)

Flight Controller

BetaFPV F4 2-4S AIO 12A Brushless Flight Controller (No Rx) (2 builds)


4 x LIL-FLOATERS 1103 8000kv


GEMFAN 3018 PROPS - (4CW + 4CCW) (12 builds)

FPV Camera

RunCam Nano 2 (1.8mm) - PAL (2 builds)

FPV Camera

Caddx Turbo EOS2 4:3 1200TVL 2.1mm 160 Degree 1/3 CMOS Mini FPV Camera NTSC/PAL For RC Drone (31 builds)

FPV Transmitter

TBS Unify Pro32 Nano 5G8 V1.1 (11 builds)


TBS 5G8 Micro Antenna


TBS Crossfire Nano RX - FPV Long Range Drone Receiver (568 builds)


Gaoneng GNB 7.4V 2S 450MAH 80C Lipo Battery XT30 Plug (26 builds)

Misc Parts

TBS Toothpick Mounting Board (2 builds)
Show stores (3)


Sign in to comment

ShogunFPV   11 days ago  

Hey man, how do you wire up the smart audio on the tbs mounting board? I am sure i have it correctly setup or something is broken. I love this little build and mine flies great but I am stumped with the smart audio.

daich   11 days ago 

yeah, the solders straight up with a solder blob bridge from the nano to the mounting board, except I ran crossfire instead of smart audio which requires both ch3 & ch4 whereas smart audio you only need one of them.

ShogunFPV   11 days ago 

Im gonna have to invest in crossfire, once Tango 2s are more avalible I will take the plunge. is it the rectangular pad with SA that i use? near the VTX or one of the pads on the arms?

Samiel2d   Mar 06, 2020  

sucks about the luck with the nano 2. only qc problem ive had was the lens on one came apart while trying to focus the darn thing. next nano cam i plan on going with is the predator v4. going with the micro size instead of the nano as my canopy allows it (running a hx115 frame and twig xl canopy)

Guides & Reviews

27 1,903  27
21 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,776  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more