Spinner TP3

By Pairadime on Mar 07, 2020

15 1,124 7

I've had a lot of bad luck building Micro Quads. I find most whoop boards are not durable. I have managed to go through 3 Betafpv 20A boards, 1 NamelessRC, 1 Diatone and 1 Flywoo.

This quad has a Pyrodrone board, it's motor pads are really nicely spaced and so far has been better then all the others I have tried. This TP3, follows Bob Roogi's recommended build. I am very happy with the results.

First Day Flying:

Photos

Part List

Frame	ToothPick 3 Frame - TP3 (35 builds) Fpvcycle.com	$14.99
Flight Controller	PYRODRONE AIO-412T (FC+ESC AIO) (4 builds) Pyrodrone.com	$42.99
Motors	4 x AMAXinno 1303 Brushless Motor Toothpick (4 builds) Airbladeuav.com	$51.96
Propellers	GemFan Hurricane 3018 2-Blade 2mm Hub (3 builds) Airbladeuav.com	$3.99
FPV Camera	Caddx Turbo EOS2 1200TVL Micro FPV Camera 16:9 and 4:3 Cyclonefpv.com	$12.99
FPV Transmitter	RUSHFPV Tiny Tank 25-350mW 5.8GHz Micro VTX - U.FL (67 builds) Racedayquads.com	$29.99
Antenna	True RC AXII-U.FL 5.8 (SHORT) RHCP, SN Hobbies - RC Multirotors, Airplanes, Helicopters, Cars & Trucks, Boats, Quadcopters (3 builds) Snhobbies.com	See Site
Receiver	Frsky XM+ Micro D16 SBUS Full Range Receiver Up to 16CH, SN Hobbies - RC Multirotors, Airplanes, Helicopters, Cars & Trucks, Boa Snhobbies.com	See Site

Show stores (6)

Like Copy Part List Follow Pairadime

Discussion

spaces Mar 10, 2020

Design is amazing and all the features in it is also so great which is attractive happy wheels unblocked

bigalusmc Mar 10, 2020

What canopy is that? outstanding build.

Pairadime Mar 10, 2020

Thanks!
canopy was designed for a 5"
toothpick
https://www.thingiverse.com/thing:3968540

Samiel2d Mar 08, 2020

give the geprc 20a board. motor pads are shallow in comparison to others but are wide and the trace goes down the edge. ive ran the same board through 4 frames since i bought the fc.

Pairadime Mar 08, 2020

I have tried everything else, so why not. The mounting holes are different than most whoop boards. I guess it fits fine?

Samiel2d Mar 08, 2020

the holes are 26mm apart with m3 holes. it has fit everything ive put it in with the standard 25.5 whoop holes. hx115 was a little tight but not unusable. gep also says that you can nip the ends of the holes off for a easier

sergetania Mar 07, 2020

Love TP3! I need to build another one but everything has been sold out forever.

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews