All the information about this project can be found at: https://mbc-35.square.site/
The design of this drone was based off the DRL Racer 4. Currently a add your own electronics kit is up for purchase. I am still working on getting all the custom LEDs and electronics produce.
Photos
Part List
Frame |
Racer 4LA Frame Kit | MBC
(2 builds)
Mbc-35.square.site
|
See Site |
Motors |
4 x Avenger 2510 Motor
(5 builds)
Brotherhobbystore.com
|
$84.00 |
Propellers |
HQProp 7X4X3 Light Grey (2CW+2CCW)-Poly Carbonate
(5 builds)
Hqprop.com
|
$3.59 |
Batteries |
RDQ Series 18.5V 5S 2200mAh 80C Long Range LiPo Battery - XT60
(27 builds)
Racedayquads.com
|
$38.49 |
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Is it CF wrapped in an injection molded cover?
We are still working on what the final cover will be made of but the prototyp (images) use a 3d printed cover. The drone has a carbon fiber plate but a 3d printed outside
almost $250 for a cf plate and 3D print?
Seems like it. Still dope though. I would get it if it weren't so expensive.
I am currently working on getting the price down. the $250 price you are seeing is for the full kit frame kit. I am working out deals with manufacturers that will hopfully bring the cost to sub $200
Can yourelease the files publicly so when someone lands in soft grass with their 3d prin they don't have to pay $50 to get a new one?
This problem is known and we are working on fixing the price, $50 is not the final price.
What material are you printing the shell in? TPU is practically indestuctable! if you were to print in this, you would never have to replace these parts. If anyone needs printing tips for TPU, Shoot me a Message. Carbonfiber filled Nylon is also very durable and light compared to other 3DP materials.
The canopy is currently printed from PETG but POLYCARBONATE versions are currently being prototyped.