Iflight IX4 v3.1 158g

By Fred fpv on Mar 27, 2020

9  185  0

Finally i got my 4 inches quad back.
with the new law in Canada it's better to stay under 250g.   since my Martian is retreated  (over weight +500g) and I'm flying 2 or 3 inches the feeling is less stable. can't wait to receive my batteries to see how it is flying.

Photos

Part List

Frame

Amazon.com
Amazon.com
See Site

Flight Controller

HGLRC FD435 STACK 20X20 3-6S FD F4 Mini fc 35A BL32 4in1 ESC (7 builds)
Hglrc.com
$47.99

Motors

4 x EMAX RS1606 3300Kv Micro Motor (11 builds)
Racedayquads.com
$51.96

Propellers

Gemfan Flash 4052 Tri-Blade 4" Prop 4 Pack - Choose Your Color (11 builds)
Racedayquads.com
$2.99

FPV Camera

Foxeer Monster Micro Pro 1.8mm 16:9 1200TVL PAL/NTSC WDR Low Latency FPV Camera (21 builds)
Banggood.com
$25.89

FPV Transmitter

Eachine NANO VTX 5.8GHz 48CH 25/100/200/400mW Switchable FPV Transmitter Support OSD/Pitmode/IRC Tramp (43 builds)
Banggood.com
$14.90

Antenna

Speedy Bee 5.8GHz 2dBi FPV Antenna MMCX RHCP/LHCP for RC Drone Aircraft FPV Goggles Monitor Video Trandmitter Receiver (3 builds)
Banggood.com
$7.45

Receiver

FrSky XM+ (Mini SBUS Non-telemetry Full Range) (1368 builds)
Rotorgeeks.com
$20.29

Batteries

5 x CNHL MiniStar 650mAh 14.8V 4S 70C Lipo Battery For 3" Mini Quad (4 builds)
Chinahobbyline.com
$67.45

Radio

FrSky ACCST Taranis Q X7 Transmitter 2.4G 16CH Mode 2 White Black International Version for RC Drone (205 builds)
Banggood.com
$154.04

Goggles

Aomway Commander Goggles V1 FPV 2D 3D 40CH 5.8G Support HD Port DVR Headtracker For RC Drone (37 builds)
Banggood.com
$255.90

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (145 builds)
Banggood.com
$53.99

Tools

7 Pcs Steel Hex Socket Nut Key Screwdriver Wrench Tool Set (2 builds)
Banggood.com
$8.93

Backpack

IFlight Backpack Case with Radio Transmitter FPV Goggle Motor and Support Hang RC Drone FPV Racing (8 builds)
Banggood.com
$43.89
Show stores (6)

Discussion

Sign in to comment

Guides & Reviews

27 2,210  29
24 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,860  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more