Built this 4S Bumblebee to my friend.
It rocks iFlight F7 HD fc and 4in1 40A esc.
Really simple build, since only esc wires are needed to solder.
Printed some lovely clothes to her of Sainsmart green tpu.
GoPro Hero 8 mount (10 degrees): https://www.thingiverse.com/thing:4225403
Cam cage, different duct designs and antenna holders: https://www.thingiverse.com/thing:4105886
Frame |
Iflight BumbleBee HD V2 CineWhoop Frame
(4 builds)
Drone-fpv-racer.com
|
See Site |
Flight Controller |
Iflight SucceX-D Mini F7 TwinG Stack (Mini F7+40A ESC)
Drone-fpv-racer.com
|
See Site |
Motors |
4 x Moteur Brushless Emax RS1606 - 3300Kv
(3 builds)
Drone-fpv-racer.com
|
$56.00 |
Propellers |
GEMFAN Squirt Props 75mm
(6 builds)
Drone-fpv-racer.com
|
See Site |
FPV Transmitter |
Unité aérienne DJI FPV
(293 builds)
Drone-fpv-racer.com
|
See Site |
Antenna |
Antennes RP-SMA pour unité aérienne DJI FPV (2pces)
(5 builds)
Drone-fpv-racer.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Looks good! I'm glad there are files our there for 3D prints. I plan to build a blacked out version. Do you ever use the SD card slot on the air unit? How did you mount the air unit? Doesn't look easy to get to.
Hello,
Thank you! I use the SD card slot, card can be removed and inserted without disassembly but it is a pita on this frame. Air unit is mounted the standard way to this, just sitting on the slot, that is carved to duct foam.