Mockup

The Hyphiest 3

By HyphPV on Jan 28, 2017

2  152  0

Racing triplets going together for the 2017 season. Finally getting a cloned out fleet together. Flying 5" props on the 6" frames.

Part List

Frame

Le Hyphy by Adam Kobitz (34 builds)
Hyphymultirotors.com
$39.99

Flight Controller

Flip32 F4 (Revo Pin Header edition) V2 (21 builds)
Readytoflyquads.com
$17.00

ESCs

4 x 30A BLURR ESC BLHELI-(ONESHOT)
Readytoflyquads.com
$56.00

Motors

4 x RTF TS2207 - 2300KV BRUSHLESS MOTOR (19 builds)
Readytoflyquads.com
$64.00

Propellers

Team RACEKRAFT 5051 5" TRI-BLADE PROP - INSANE SPEED (SkyStar Blue) (123 builds)
Readytoflyquads.com
$3.99

FPV Camera

Foxeer HS1177 XAT600M 5~22V NTSC 2.5mm lens
Droneeclipse.com
$37.99

FPV Transmitter

TBS UNIFY PRO 5G8 HV - RACE (SMA) (544 builds)
Droneeclipse.com
$19.95

Antenna

TBS TRIUMPH-STUB SMA (RHCP 2PCS) (11 builds)
Droneeclipse.com
$29.95

Receiver

FrSky X4R-SB 3/16 Channel Receiver SBUS (w/telemetry) (177 builds)
Droneeclipse.com
$23.99

Batteries

Tattu R-Line 1550mAh 95C 4S1P lipo battery pack
Droneeclipse.com
$32.99

Power Distribution

RTF V5.0 Power HUB&BEC 5V 12V (30 builds)
Readytoflyquads.com
$2.25

Misc Parts

Super Bright 7530 LED Bar V2 - Yellow
Readytoflyquads.com
$1.00
Show stores (3)

Discussion

Sign in to comment

Guides & Reviews

27 1,299  11
18 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
43 4,845  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more