I love the Lal5 frame. But the electronic part and motor sucks a lot, so after some month with the original quad, there is my update for freestyle and midrange .
Frame |
Eachine LAL5 228mm 4K FPV Racing Drone Spare Part 225mm Wheelbase 5mm Arm Frame Kit
(2 builds)
Banggood.com
|
$28.93 |
Flight Controller |
Mamba F405 Flight Controller MK2
(7 builds)
Diatone.us
|
$19.99 |
ESCs |
SucceX-E 45A 2-6S BLHeli_S Dshot600 4-in-1 ESC
Iflight-rc.com
|
$29.99 |
Motors |
TBS Moteur Steele Ethix Stout V3
(6 builds)
Drone-fpv-racer.com
|
$36.40 |
Propellers |
HQ Prop Ethix S5 Light Grey (2CW+2CCW)-Poly Carbonate
(4 builds)
Pyrodrone.com
|
$3.49 |
FPV Transmitter |
DJI Digital FPV Air Unit - Ultra Low Latency 720p 120FPS Digital HD
(188 builds)
Racedayquads.com
|
$179.00 |
Antenna |
DJI Digital FPV Air Unit Elbow MMCX Antenna 2 Pack
(44 builds)
Racedayquads.com
|
$15.00 |
Receiver |
FrSky R9MM Long Range 915MHz RC Receiver - Get Yours Today! - RMRC
(109 builds)
Readymaderc.com
|
$20.80 |
Batteries |
TATTU R-Line 1050mAh 6s 95C Lipo Battery
(50 builds)
Getfpv.com
|
$35.99 |
3D Printed |
TBS Source One GoPro Hero 5/6/7 Mount
(3 builds)
Brain3d.co
|
$15.00 |
FPV has had quite a journey. Just a few years ago we started racing drones around a track and doing flips over trees, but professional cinematic FPV is a more recent development. DJI has always owned the drone photography market, but smaller acrobatic drones are starting to enter the market. They have the advantage of close proximity flight indoors and around people. There's more artistic freedom and..
Read moreFor the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..
Read more
Hi, that's a very nice build and a really tight fit. Would you mind sharing a photo of DJI connector wiring on the FC. I have the exact same FC and I'm not sure how to solder it up correctly.
hi mate,
i've soldered only he RX and the TX from the air unit to the FC. The power is directly from the lipo pad from esc.