PYROCUBE (275g)

By wklee.fpv on Apr 03, 2020

17  422  2

PYROCUBE - the best vertical box frame!!

Frame: Pyrocube
Flight Controller: T-Motor F7
ESCs: F55A Pro II
Motors: HYPERLITE 2207.5 E-SERIES - 1922KV
Propellers: HQ Prop R38 / Gemfan 51466
FPV Camera: RunCam Racer Nano 2
FPV Transmitter: RUSH Tiny TANK Nano VTX
Antenna: Foxeer 5.8G Lollipop
Receiver: Spektrum SPM4650
Batteries Tattu R-Line 1300mAh 6S

Weight: 275g w/o propellers

Photos

Part List

Frame

Pyrocube 5INCH Vertical Box Racing Frame by Hyperlite
Taco-rc.com
$44.99

Flight Controller

T-Motor F7 Flight Controller F55A Pro II 55A 3-6s BLHeli32 4-in-1 ESC w/ BEC Flytower For FPV Racing RC Drone
Taco-rc.com
$102.99

Motors

4 x HYPERLITE 2207.5 E-SERIES - 1922KV (4 builds)
Taco-rc.com
$55.96

Propellers

HQ Prop HeadsUp Racing Prop R38 - Blue (4 builds)
Taco-rc.com
$3.39

Propellers

Gemfan Hurricane 51466 Durable Tri-Blade 5" Prop (Set of 4 - CLEAR) (18 builds)
Taco-rc.com
$3.29

FPV Camera

RunCam Racer Nano 2 CMOS 700TVL 1.8mm Super WDR Smallest FPV Camera 6ms Low Latency Gesture Control Integrated OSD for FPV Racer (4 builds)
Taco-rc.com
$34.99

FPV Transmitter

RUSH Tiny TANK Nano VTX 48CH 350mW TBS SmartAudio FPV Video Transmitter 5V Foxeer Lollipop 3 for RC Drone FPV Racing Toothpick (2 builds)
Taco-rc.com
$19.99

Antenna

2pcs Foxeer 5.8G Lollipop 3 2.5DBi Omni FPV Antenna RHCP U.FL - BLACK (3 builds)
Taco-rc.com
$19.99

Receiver

DSMX SRXL2 Serial Micro Receiver (2 builds)
Spektrumrc.com
$26.99

Batteries

Tattu R-Line Version 3.0 1300mAh 120C 6S High Voltage Lipo Battery Pack with XT60 Plug (8 builds)
Taco-rc.com
$36.99

3D Printed

3DPOWER Fixed FPV Micro Camera Mount for Hyperlite Pyrocube FPV Freestyle Racing Quadcopter
Taco-rc.com
$6.99

3D Printed

3DPOWER Axii Lollipop / SMA / RX Antenna mount for Hyperlite Pyrocube FPV Freestyle Racing Quadcopter
Taco-rc.com
$5.99

3D Printed

Universal TURTLE MODE FIN Type A (choose standoff width)
Taco-rc.com
$4.99
Show stores (2)

Discussion

Sign in to comment

Boeseefus   Apr 08, 2020  

Sweet Build!

wklee.fpv   Apr 09, 2020 

thanks.

Guides & Reviews

27 2,209  29
24 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,860  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more