FLYWOO Mr Croc HD 7 Frame

By drewzh on Apr 05, 2020

4  173  0

Technically my first complete build (though I'm currently building 5 other quads of various sizes). I haven't actually flown yet except for on simulators (100+ hours). I came into the hobby with analogue parts but then DJI announced the HD system, so I bit the bullet, sold my analogue gear and decided to re-build everything to support HD. I purchased a bunch of parts not really knowing the technicals to proper motor/prop pairing etc and ultimately ended up with so many different frames/motors and boards etc that I ended up building a bunch of them. I have another build with cheaper parts that I'll use for my first flight :)

  • 6S build
  • Crossfire nano RX
  • Speedybee bluetooth
  • Matek GPS
  • Fully comformal coated (except for DJI equipment)


Part List


FLYWOO Mr.Croc HD 225mm 5inch 6inch 7Inch FPV FreeStyle Racing Frame Kit for DJI FPV HD

Flight Controller

iFlight 30.5x30.5mm Flytower SucceX F7 TwinG Plus F7 OSD Flight Controller & 50A BL_32 4in1 ESC for RC Drone


4 x T-motor F40 PRO II 2306 1600KV 2400KV 2600KV 3-4S Brushless Motor for RC Multirotor FPV Racing Drone (6 builds)


2 Pairs DALPROP CYCLONE T7056C 7inch Crystal 3-blade Propeller for RC FPV Racing Drone (11 builds)

FPV Camera

DJI FPV Air Unit Digital 5.8Ghz 1080p/60fps 28ms/4km HD Recording FPV Transmitter Camera Combo for FPV Racing Drone RC Airplane (85 builds)


TBS Crossfire Nano RX (SE) - FPV Long Range Drone Receiver (310 builds)


CNHL MiniStar 1250mAh 22.2V 6S 70C Lipo Battery XT60 Plug for RC Drone FPV Racing (19 builds)


Jumper T16 Pro V2 Transmitter With Hall Sensor Gimbals (28 builds)


DJI FPV Goggles HD Digital 5.8Ghz 1440*810 720p/120fps Low Latency with DVR Compatible With Caddx Vista for FPV Racing Drone RC (46 builds)

Misc Parts

Eachine Wizard X220HV FPV Racing RC Drone Spare Part SpeedyBee bluetooth Module (4 builds)

Misc Parts

Matek Systems M8Q-5883 SAM-M8Q GPS & QMC5883L Compass Module for RC Drone FPV Racing (7 builds)

Misc Parts

Panasonic 35V 1000uF LOW ESR Capacitor (10 builds)

Misc Parts

XT60 Pigtail 14AWG 4" - Choose Your ColorBlack (14 builds)
Show stores (5)


Sign in to comment

Guides & Reviews

27 2,211  29
24 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,860  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more