I've been loving the DJI FPV system since I converted a couple of builds to it. So, I'm always looking for new and interesting compatible frames to use the system. I stumbled across the Hyperlow RS+ and figured I'd do a 6" build. But I didn't like how this quad flew on 6" props, I probably needed some larger motors. I decided to try the Gemfan 5552 props on this frame and it was perfect! Love the way it flies! Smooth, plenty of power and agile... my batteries are definitely not happy, but I am!
Frame |
HYPERLOW RS+ EX
(4 builds)
Hyperlowframes.com
|
$80.00 |
Flight Controller |
Diatone Mamba F722 APP Flight Controller
(11 builds)
Getfpv.com
|
$54.99 |
ESCs |
MAMBA F60PRO Dshot1200 4IN1 ESC 60A 6S 30*30mm
(2 builds)
Diatone.us
|
$62.99 |
Motors |
4 x Hyperlite 2208.5-1722KV TEAM EDITION
(3 builds)
Pyrodrone.com
|
$91.96 |
Propellers |
Gemfan Durable 5552 Tri-Blade 5.5" Prop 4 Pack - Choose Your ColorClear
(20 builds)
Racedayquads.com
|
$3.85 |
FPV Camera |
DJI Digital FPV Camera
(164 builds)
Racedayquads.com
|
$59.00 |
FPV Transmitter |
DJI Digital FPV Air Unit Video Transmission Module
(121 builds)
Racedayquads.com
|
$99.00 |
Receiver |
TBS Crossfire Nano Rx
(1500 builds)
Getfpv.com
|
See Site |
Batteries |
TATTU R-Line 1050mAh 6s 95C Lipo Battery
(50 builds)
Getfpv.com
|
$35.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
where did you find the dji air unit mount print i need one
its not a mount. I put some ummagrip under the air unit and used some large heavy duty heatshrink and a zip tie to secure it
i apologize i mean the dji antenna holder.
oh gotcha, that was a generic one from brain3d. it wasn't built for this frame but it works
can you give me the link
my bad after looking at the website I remembered its the antenna mount from a newbeedrone vivid frame. the generic ones from brain3d should fit the spacing on the rear standoffs is pretty standard
https://www.brain3d.co/collections/hd-antenna-sets/products/dji-hd-fpv-antenna-mount?variant=30883096199255
Thanx man
no