Mobula 6 to Mobula 7 Pusher

By rodrigo_sclosa on Apr 14, 2020

12  243  2

I decided to do a test and mount my Mobula 6 in the frame of the Mobula 7 v3 (like Pusher) and use 40mm props.
My Mobula 6 had 25000kv motors and I am using an external RX to increase the range. I also made the mod to use a better FPV antenna, by soldering an IPEX connector on the board.

I did painting with Water Transfer in the frame. The setup was 26g in weight without a battery.

I designed a support for the Runcam Nano 3, taking advantage of the original LED support of the Mobula 7 frame.

If you liked this, please consider to buy me a coffee at https://www.buymeacoffee.com/rodrigosclosa

Photos

Like Copy Part List Follow rodrigo_sclosa

Discussion

Sign in to comment

kenken6477   Apr 18, 2022  

any pid n rates to share

pcfranco05   Apr 22, 2020  
1

What is the flight time of this? I want to build something similar, but am unsure if I should go with a 75 mm build or a 65 mm build.

Featured Builds

Featured Builds