1s Micro Raven V2

By onemorepabst on Apr 26, 2020

13 596 6

My original 1s Raven was alright but eventually the FC died. Now im using the Betafpv 1s board which has worked well in my whoop and works well on this build too. I removed the plugs and direct soldered the motors this time for weight savings and better voltage/amp performance.

Im also using the new HQ T65 triblade props and these are performing stellar . If you havent tried these props on a 1s build, you should. Lots of grip and punch.

I also got the Micro Raven canopy FDM TPU printed instead of SLS, and I have to say I prefer the FDM's look and finish better.

Getting about 3 minutes flying mixed in Acro and Angle mode with BF 4.1 and Jazzmaverick with RPM filter with a 1s 333mah HV. Unfortunately I dont have a scale so I dont know the weight

Screenshots of my BF settings below, still ongoing tuning process but this is about 80-90% there

Photos

Part List

Frame	HX100 SE T300 Carbon Fiber Frame (8 builds) Betafpv.com	$8.99
Flight Controller	BETAFPV F4 1S Brushless Flight Controller V2.0 - No RX (10 builds) Getfpv.com	See Site
Motors	4 x GEPRC GR1102 Motors - GEPRC (6 builds) Geprc.com	$39.96
Propellers	HQ Prop T65MMX3 Tri-Blade 2.5" Prop 4 Pack (3 builds) Racedayquads.com	$1.89
FPV Camera	Caddx Turbo Eos2 Nano 1200TVL CMOS 16:9 NTCS FPV Camera (2.1mm) (37 builds) Racedayquads.com	$14.99
FPV Transmitter	Eachine NANO VTX 5.8GHz 48CH 25/100/200/400mW Switchable FPV Transmitter Support OSD/Pitmode/IRC Tramp (53 builds) Banggood.com	$14.90
Receiver	FrSky XM SBUS Micro Receiver (85 builds) Getfpv.com	$11.99
Batteries	TINY WHOOP HV 333mah 1s Lipo Battery - BT2.0 CONNECTOR (8 builds) Tinywhoop.com	$6.49
3D Printed	Micro Raven Pods & Mounts by NomadUAV (4 builds) Thingiverse.com	See Site

Show stores (7)

Like Copy Part List Follow onemorepabst

Discussion

bruh Jan 11, 2021

Maybe we can use it to deliver our professional resume writers works? I think that it could be useful for improving our delivering process and other specific needs of our service. Maybe we should purchase it right now?

ghostface Sep 17, 2020

Cool - any dvr from this one?

Mosesecker May 01, 2020

Screenshots of these devices are now posted. I don't know the use of these devices which they are showing on the page, I just want to know what are them and what is the reason which is behind expert paper writer. To show working of these devices which you have to learn them first.

The Van Apr 28, 2020

Nice! Dig the blacked out stealth look & glad to see that canopy getting used :) I've got a new one incoming shortly

jnguy101 Apr 27, 2020

What made you think the FC burnt out? Causes?

onemorepabst Apr 27, 2020

I originally had the plugs for the motors on the crazybee board but decided to remove them. when I resoldered everything back up and did a spin up test in BF I saw smoke come out from one of the mosfets. Be careful removing plugs from any board, shit is not easy

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews