First digital build with the DJI digital system. Everything fit quite nicely in there, after re-designing and printing a spacer/stack that fit the Crossfire Nano Rx, which also pushes the stack forward by about 8mm. I also designed wire sheaths for the arms, because up to this point I've always had builds with single ESCs laying on the arms.
All up dry weight: 428 grams
Thanks to M490fpv for the files to modify: https://www.thingiverse.com/M490fpv/about
My Thingiverse : https://www.thingiverse.com/lokihaus/about
Using the 2150kv, not the 1750 that was in the drop down, below (because 5s).
Photos
Part List
Frame |
Armattan Marmotte 5" Frame
(91 builds)
Racedayquads.com
|
$109.00 |
Flight Controller |
NewBeeDrone Infinity305 Flight Controller
(8 builds)
Newbeedrone.com
|
$39.99 |
ESCs |
NewBeeDrone Infinity305 3-6s 4n1 ESC (45A + 55A Burst)
(9 builds)
Newbeedrone.com
|
$89.99 |
Motors |
4 x T-Motor F60 PRO III Motor - 1750kv
(14 builds)
Pyrodrone.com
|
$99.60 |
FPV Camera |
DJI Digital FPV Camera
(164 builds)
Racedayquads.com
|
$59.00 |
FPV Transmitter |
DJI Digital FPV Air Unit Video Transmission Module
(121 builds)
Racedayquads.com
|
$99.00 |
Antenna |
DJI Digital FPV Air Unit RP-SMA Antenna 2 Pack
(12 builds)
Racedayquads.com
|
$15.00 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1507 builds)
Team-blacksheep.com
|
$24.95 |
HD Camera |
GoPro HERO8 Black Action Camera
(9 builds)
Getfpv.com
|
$399.99 |
Hello guys,NEED HELP
I have all the same components as this built here and my crossfire connect to nano rx and everything ok, but my transmitter in telemetry dont find the drone(only 9 point find), and in betaflight same, no movement show when I move sticks and I update everything but nothing help and solder like that, everything and I have the DJI unit with NewBee ESCs
Please help!
love the printed parts. are they public anywhere?
Thanks! All the printed parts can be found on my thingiverse page, which is linked in the description of this build.