HX-100 Build
-betafpv frame, motors and FC but used different RX, 3D print parts and AIO Camera VTX
-2x PH 2.0 connectors wired in parallel for use with 2x 220mah whoop batteries at once (this is still a 1s only build)
-both the 2x 220mah at 4.35v batteries or 1x 550mah at 4.2v gives a 4-5min flight time.
-used a Full Flysky RX because of all the negative range reviews of the built in RX versions of the board
This is a very light quad and quieter than most whoops. just don't lose it in the tall grass.
Photos
How does it fly? I am thinking about building one of these with a mobula 7 f4 fc and Gemfan 2-bladed props.
it fly's amazingly well. its like a 5" trainer quad. I think with the bi-blade props not grabbing the air as well as tri-props it drifts around corners like my 5" does. its a perfect mini copy.
your mobula 7 fc will be more than enough although i think the difference in the 0802 motors of the mobula will have a different result than the 1102 i used. also i think the press on prop bolt is slightly larger diameter at 1.5mm for the 1102's. here's a video of me flying but no comments on my lack of skills with the model or the video editor
OK Thanks for replying I was thinking about using fpvcycle 1202,5 11500kv motors
I'm sure your build should fly fantastic and have a little more umph than my build.