SLR Wing

By chr_mathieu on May 01, 2020

0  5  0

Part List


Sonicmodell AR Wing 900mm Wingspan EPP FPV Flywing RC Airplane KIT

Flight Controller

Matek System F722-SE F7 Dual Gryo Flight Controller w/ OSD BEC Current Sensor Black Box for RC Drone (6 builds)


4 x Racerstar RS30A Lite 30A Blheli_S BB1 2-4S Brushless ESC Support Dshot150 Dshot300 for RC FPV Racing Drone (5 builds)


4 x Racerstar BR2212 2450KV 2-3S Brushless Motor For RC Models


2 Pairs Emax AVAN Long Range 6 Inch 6038 6X3.8X2 Propeller Black Color CW CCW for RC Drone (9 builds)

FPV Camera

Foxeer Razer Mini 1/3 CMOS HD 5MP 2.1mm M12 Lens 1200TVL 4:3/16:9 NTSC/PAL Switchable FPV Camera For RC Drone (3 builds)

FPV Transmitter

30.5x30.5mm Holybro Atlatl HV V2 5.8G 40CH 25/200/500/800mW FPV Transmitter Built-in Microphone (16 builds)


Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP Antenna 1 Pair Blue Red w/Canopy For RC Drone (112 builds)


FrSky R9 Slim+ OTA ACCESS 16CH 900MHz Long Range RC Receiver Support Wireless Upgrade Firmware Update Inverted SBUS S.Port Outpu


Turnigy graphène Professional 3000mAh 3S 15C LiPo pack w / XT60

Power Distribution

Hobbywing 3A UBEC 5V 6V Switch Mode BEC For RC Models


FrSky ACCST Taranis Q X7 Transmitter 2.4G 16CH Mode 2 White Black International Version for RC Drone (218 builds)


Eachine EV800D 5.8G 40CH Diversity FPV Goggles 5 Inch 800*480 Video Headset HD DVR Build in Battery (2 builds)

Radio Module

Frsky R9M 2019 900MHz Long Range Transmitter Module and R9 Slim+ Receiver with Mounted Super 8 and T antenna

Battery Charger

SKYRC D100 V2 AC DC Dual Balance Charger Discharger Power Supply (3 builds)

Soldering Iron

Station de soudage numérique Ersa RDS 80 80 W +150 à +450 °C |
See Site
Show stores (3)


Sign in to comment

Guides & Reviews

28 1,450  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,941  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more