AirBladeUAV Transformer Mini 4in

By AlderBoyFPV on May 03, 2020

10  257  0

AirBladeUAV Transformer Mini 4in. 131g without lipo. 218g with 750mah 4s. Good for a solid 8min of long range cruising in HD.

Using the BetaFPV AIO 20A V3, AirBladeUAV Superman 1404/3850kv motors with BetaFlight 4.1.6, RPM Filters and a tune from Stew Alcock.

Follow this guide, but instead of using the JESC Firmware (that costs a small amount), use the free JazzMaverick Firmware.

BetaFPV AIO Guide:

JazzMaverick Firmware (G_H_25_REV16_73.HEX):

Stew's PIDs & Filters are in the photo gallery.

Quick flight video:


Part List


AirBlade Transformer Mini 4 inch Long Range (2 builds)

Flight Controller

BetaFPV Toothpick F4 20A AIO Flight Controller 2S-4S (6 builds)


4 x AirBlade Superman AB 1404 Brushless Motors (43 builds)


HQ Prop T4X2.5 Durable Prop (4 builds)

FPV Camera

Caddx Vista (18 builds)


GNB 850 mAh 4S 14.8V 80C/160C XT30 (4 builds)
Show stores (2)


Sign in to comment

Guides & Reviews

27 2,211  29
24 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,860  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more