BOTHROPS 115
By armandrone on May 06, 2020
The frame was produced by Armando Périgo (ARMANDRONE FPV), with a 115 mm wheelbase in the true "X" format, with the battery mounted on the top, it also has a heat sink for the VTX and adjustment of the camera tilt. 0º to 40º degrees.
It was produced with a fiberglass blanket impregnated with cyanoacrylate . The bottom plate is 3mm thick and the top and sides are 1.5mm thick. Two rubber foam rings were developed for the battery holder, which does not require battery straps.
Photos
Fiberglass, and superglue, eh? How is that holding up?
I dig your foam battery holders, do they prevent battery ejection in crashes?
Exactly, fiberglass and super glue, the glue is of low density and the fiber is a blanket ... The battery holder does not let go even in a very strong drop, and they are fixed with superglue too. These are made with the same material as flip-flop sandals and are very resistant and cushion when falling.