4" sub 250

By sloth on Jul 26, 2020

11  419  10

Discussion

Sign in to comment

nuhbiwan   6 days ago  

Check your numbers mate. Your AUW seems wrong. A Single 21700 cell weighs more than 60 grams

Show 4 more comments
nuhbiwan   6 days ago 
1

Nothing wrong with a Le Mans spec car :) Did you consider a 3S pack with 18650s? Weight should be almost the same, but with the advantage of having more voltage when they are discharged to 80-90 percent. Regarding controllability I mean...

sloth   6 days ago 
1

I've got some 3000mah 18650's I might try. Need to weigh them up and see.

nuhbiwan   6 days ago 
1

My Sony 3000mAh cells weigh 47 grams

rbtsnvrdie   13 days ago  

Nice build! How are your flight times on the li-ion pack?

sloth   12 days ago 

Thanks! Getting 25+min

Guides & Reviews

29 1,573  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,035  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more