My good 'ol trusty OG Chameleon running BF 3.5.0, in the modern digital era. I had to extend the rear deck area to accommodate the AU (if I had an extra Vista, I would have gone that route). I have not flow it yet, or done any crash testing. ...and PSA, this will void the Armattan frame warranty.
Frame |
Chameleon-Titanium Limited Edition
(2 builds)
Armattanquads.com
|
$105.00 |
Flight Controller |
CLRACING F4S V1.4
(144 builds)
Cl-racing.myshopify.com
|
$34.99 |
ESCs |
4 x Spedix ES30 HV 3-6S 30A ESCDefault Title
(154 builds)
Racedayquads.com
|
$47.80 |
Motors |
4 x Armattan Oomph Velvet Edition 2206/2300 KV Motor
(29 builds)
Armattanquads.com
|
$84.00 |
FPV Camera |
DJI Digital FPV Camera
(164 builds)
Racedayquads.com
|
$59.00 |
FPV Transmitter |
DJI Digital FPV Air Unit - Ultra Low Latency 720p 120FPS Digital HD
Racedayquads.com
|
$179.00 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1498 builds)
Team-blacksheep.com
|
$24.95 |
Misc Parts |
Matek MICRO BEC 5V/12V-ADJ
(4 builds)
Pyrodrone.com
|
$4.99 |
did you design the printed parts that hold the camera? I got an adapter off thingverse but its really tight fitting
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Great job! Thank you for sharing your build and print designs. Does the cage get in the DJI camera's view (whether 4:3 or 16:9)?