Source One HD 6s

By fpvlify on May 23, 2020

3  135  2

A minimal setup with Source One and Dji Fpv.

I didn't have long enough screws so I had to install the flight controller on center and the esc on back. The track on back of the frame had to be widened for esc's m3 screws to fit in.

My first build. The wires could have been drawn more neatly. I guess I wasn't sure do I keep the esc on back and left some slack. Anyway, it flies great!

Holybro Kakute F7 HDV Flight Controller Tekko32 F3 HDV 40A 3-6S Blheli_32 4 In 1 Brushless ESC

T-motor F40 PRO II 2306 1750KV

DJI Goggles

DJI FPV Air Unit Digital 5.8Ghz 1080p/60fps

HQProp DP5x4.3x3V1S

Vifly Finder 2 5V Super Loud Buzzer Tracker

Photos

Part List

Frame

TBS Source One 5" Frame V3 (97 builds)
Getfpv.com
$26.99

FPV Camera

DJI FPV Air Unit (4 builds)
Amazon.com
$164.99

Receiver

TBS Crossfire Nano RX - FPV Long Range Drone Receiver (667 builds)
Team-blacksheep.com
$24.95
Show stores (3)

Discussion

Sign in to comment

Jodie Froster   May 23, 2020  

Your antenna are going to get decimated by your props, you need something rigid to keep them from flopping down into the props

fpvlify   May 24, 2020 

Thanks for your advice! One of the antennas actually touched already props. That seems to happen with bigger 1500mah batteries that are so wide that they push the antennas down. I have been thinking to get something 3d printed for them. And for the tbs antenna too.

Guides & Reviews

39 4,136  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,901  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more