Diatone Taycan 6s
By Simo_red-5 on May 17, 2020
This is my second build but actually its the first of the 2 builds I've done thats flown. a few bounces off the walls so far
followed by some help from m490fpv and his kopis build info led to some successful indoor hover tests. still fine tuning the settings to thefeel i like from the sticks but definite progess im hoping will lead to some longer flights soon and finally using the skyzone 030s i bought.
I originally put a rush tank ultimate plus in this frame but decided to swap some components between the taycan and marmotte for better fit/placement.
Photos
Part List
Show stores (4)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
are these motors getting hot?
Are you able to go full throttle without problems?
no problems at all with going to full throttle. motors are running cool. almost 6 minute flight times and they are barely warm. I'm running the gemfan cinewhoop props but just but the 6 blade hq props on so when i try ill add my comments on any performance difference
Nice! But you are running 6s right?
My build now is
Shendrones Squirt v2 Dji
Ethix flat rat 1507 2800kv motors
45a Tmotor esc and Fc
Crossfire.
when i go to full throttle it desyncs and burns up motors.
it is supposed to be for 6s.
already lost 3 motors and didnt even got to fly it.
Now i want to change to
Brotherhobby Vy 1507 3100Kv with an aikon 35a Blheli32 4in1 esc and the aikon f7 Hd mini Fc.
You think that 35a enough esc power?
motor specs say it is way more than enought.
I also have the option to buy the T-Motor F1507 2700kv motors.
what.would you do?
sorry for the many questions but i dont want to buy more crap you know. haha
yep im running 6s. im still learning myself sk im not exactly sure how to help.
the only thing I can think of is what whelped me. i found m490fpv on rotorbuilds and used basically all of the info on his kopis build as a starting point for my bl32heli setup and betaflight setup.
ive used brother hobby motors on all 3 builds ive done and they have been great. ive only used the hobbywing stack myself because of its jeti exbus compatibility.
i did use m490fpv kopis setup on all my builds and its worked out good for me so take a look and see if it helps.