Racer X FPV ET5 (~135g)

By wklee.fpv on Jun 09, 2020

16 770 6

Custom made canopy for installing the rx/vtx antennas easily!!

Racer X FPV ET5
JHEMCU GHF411AIO
T-Motor F1507
HQ Prop DP 5x4x3
Flywoo GOKU VTX625
3DPOWER 915Mhz Antenna
TBS Crossfire Nano RX
TATTU R-Line 14.8V 850mAh

weight: ~135g wo/ propellers
~148 w/ propellers

Photos

Part List

Frame	Racer X FPV ET5 EXTRATERRESTRIAL TWIG 5" Frame Taco-rc.com	$19.99
Flight Controller	JHEMCU GHF411AIO F4 OSD Flight Controller Built-in 30A BL_S 2-4S 4in1 ESC for Toothpick FPV Racing Drone (2 builds) Taco-rc.com	$36.90
Motors	4 x T-Motor F1507 1507 3800KV 3-4S Brushless Motor for Cinewhoop RC Drone FPV Racing (2 builds) Taco-rc.com	$79.96
Propellers	Gemfan Hurricane SL 5125-3 Blade 5 inch Ultralite Racing Prop - Yellow Taco-rc.com	$3.29
FPV Camera	3DPOWER 600TVL 2.1 FOV 160 Degree 1/3 OSD CCD FPV Camera for RC Drone (10 builds) Taco-rc.com	$18.99
FPV Transmitter	Flywoo GOKU VTX625 PIT/25mW/50mW/100mW/200mW/450mW VTX Switchable 5V 16mm/20mm/30.5mm Mounting Hole Taco-rc.com	$16.99
Antenna	3DPOWER 915Mhz Micro RX Antenna for TBS crossfire (2 builds) Taco-rc.com	$2.99
Receiver	TBS Crossfire Nano RX (1500 builds) Taco-rc.com	$39.95
Batteries	TATTU R-Line 14.8V 850mAh 95C 4S Lipo Battery XT60 Plug for 100mm to 180mm Multirotor FPV (3 builds) Taco-rc.com	$19.99

Show stores (1)

Like Copy Part List Follow wklee.fpv

Discussion

Sugalime3D FPV Oct 14, 2023

Nice I gonna build the same with 1507 2700KV motors. I will be a 3D LOS drone. Be honest, isn't 3800KV not to much for this build with 5" props ?

DrMacca Jun 11, 2020

Sweet build! Amazing job keeping the weight down - I just finished a similar build (same frame) but with lighter motors (1505 3600kV) and it's 14g heavier! 👍👍👍

dafunk Jun 11, 2020

Did you post your build ? mine is the same weight with 1207 motors... I think the 20 mm stack I used adds weight and should be replaced by an AIO FC+ESC whoop sized board.

DrMacca Jun 11, 2020

No, not yet. I used the BetaFPV 20A AIO. I know some of my extra weight comes from the fact I used a micro rather than a nano-sized camera, and I also used a bigger antenna. Also wklee.fpv's build here is really neat and tidy compared to mine - I probaby added another gram or two from having wires too long, too much tape and zipties etc.

dafunk Jun 11, 2020

how is the ESC delivering the amps ? I saw the pads are tiny, do you feel it has a lot of power or the 30A is marketing ?

Jodie Froster Jun 09, 2020

Love the canopy! To be fair, I have loved most of your canopys.

Guides & Reviews

115 22,060 40

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

69 17,609 65

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews