Overall a very fun build platform. I'm just addicted to these light 3 inch frames now.
I initially started on emax eco 1404 motors at 6000kv but I was quite unhappy with the 1:30 flight times, even after scaling down throttle and trying every prop under the sun. Swapped in the 1105s and I'm getting at least 3 minute flights now on HQprop 3x2s. I feel like I can go onto an even lower kv for longer flights and similar power.
I took a crossfire nano and unify pro32 nano mount and sliced off 1mm to fit a XM+ into it, works great (but id print in anything but tpu). And yes thats a layer of kapton tape over the tx and rx. Just in case ;D
I originally wanted a VAS omni antenna but didnt have the clearance as I was running my battery cable through the back. The dipole works perfectly fine though.
Very happy with the end result.
80g weight, 127g with battery