First 5'' Multirotor Build

By treetopchicken on Jun 15, 2020

0  29  0

Part List


TBS Source One V3 5inch (108 builds)

Flight Controller

BrainFPV RADIX 30x30 Flight Controller (Custom Graphical OSD, Baro, Stackable, Betaflight) (111 builds)


4 x BrotherHobby Speed Shield 2207.5 1750kv Motor - Chaos Edition

FPV Camera

Foxeer Falkor 2 Micro FPV Camera - 1.8mm Lens - 1200TVL 16:9/4:3 PAL/NTSC G-WDR - Choose Your Color (68 builds)

FPV Transmitter

TBS Unify Pro 5G8 HV (SMA) (587 builds)


Lumenier AXII 2 5.8GHz Long Range SMA Antenna - RHCP or LHCP (48 builds)


Team BlackSheep TBS Crossfire Nano ReceiverDefault Title (9 builds)


ImmersionRC RapidFire Goggle Receiver Module (146 builds)


ImmersionRC RapidFire Goggle Receiver Module (146 builds)


Tattu R-Line Version 3.0 1300mAh 22.2V 120C 6S1P Lipo Battery Pack with XT60 Plug (51 builds)


TBS Tango 2 Pro - FPV RC Radio Drone Controller (27 builds)


Fat Shark Dominator HDO 2 FPV Goggles (25 builds)

Misc Parts

Permatex 24200 Medium Strength Threadlocker Blue, 6 ml

Misc Parts

Black XT60 Power Connectors (5 Pair) (8 builds)

Misc Parts

Panasonic 35V 1000uF LOW ESR Capacitor (12 builds)

Video Receiver

ImmersionRC RapidFIRE w/ Analog PLUS Goggle FPV Receiver Diversity Module (146 builds)
Show stores (8)


Sign in to comment

Guides & Reviews

60 4,925  52
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,720  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more