When the new TOA lite 1507 came out this was a perfect time to create my first 3" build (6S) with the Karearea Titi frame.
Wanted to create something that looked small, mean but powerful.
POD Design created in Autodesk Fusion360
POD Materiel:- Polymaker PolyMAX PLA (polymaker.com/product/polymax-pla/)
Paint:- DNA Custom Paints (www.dna-paints.com)
Frame |
RD-053 TITI 2" & 3" PROPS | kareareadrone
(3 builds)
Kareareadrone.com
|
See Site |
Flight Controller |
MAMBA F405US MK3 Mini F35 3-6S Flight Controller Stack
(3 builds)
Diatone.us
|
$59.99 |
Motors |
4 x NEW TOA LITE 1507 | kareareadrone
(2 builds)
Kareareadrone.com
|
See Site |
Propellers |
Gemfan Flash 3052 Tri-Blade 3" Prop 4 Pack - Choose Your ColorBlack
(70 builds)
Racedayquads.com
|
$2.99 |
FPV Camera |
Foxeer Predator Micro V4 1000TVL 16:9/4:3 NTSC/PAL CMOS FPV Camera w/ OSD PLUG VERSION - Choose Your Color & Lens
(148 builds)
Racedayquads.com
|
$23.09 |
FPV Transmitter |
TBS UNIFY PRO32 NANO 5G8 V1.1
(282 builds)
Pyrodrone.com
|
$29.95 |
Antenna |
TBS Crossfire Immortal T Antenna V2
(8 builds)
Getfpv.com
|
$5.95 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(904 builds)
Team-blacksheep.com
|
$24.95 |
Batteries |
CNHL MiniStar 650mAh 22.2V 6S 70C Lipo Battery For 3"Mini Quad
(3 builds)
Chinahobbyline.com
|
$23.98 |
FPV has had quite a journey. Just a few years ago we started racing drones around a track and doing flips over trees, but professional cinematic FPV is a more recent development. DJI has always owned the drone photography market, but smaller acrobatic drones are starting to enter the market. They have the advantage of close proximity flight indoors and around people. There's more artistic freedom and..
Read moreFor the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..
Read more
Awesome cover! What does the cover weigh? Any link?
Cover is 19grams painted. https://www.thingiverse.com/thing:4503495
I really like the organic shape and am really impressed that it is designed with fusion360.
I design 10 years with solidworks but never achieved something like this.
Do you use mesh modeling within the fusion360?
Yes. 90% mesh modeling to get the form and shape.
Well you did a nice job. I'm sure if you would sell the models you could earn a couple of bucks. Thingiverse is cool but I made some covers as well for the tyro79 and after 300+ downloads, I didn't even get a thank you, let alone somebody buys you a beer. There are some cool platforms, that are slowly growing and cause of designer get some money the quality is like it should be. Thingiverse is just swamped. This is my diatone R349
I understand your view fully. We both know that it does take a lot of work to create these designs ( yours has a awesome look. Post more pics). We all do this for various reasons. For myself this is just a hobby where I like to show something different than the normal quad design for people to like or dislike. Maybe to inject some creativity into the community.
EDIT: Just found your other designs. Amazing.
I couldn't agree more! You are the first person I am following and am looking forward to some new exotic designs.