2S toothpick park flyer

By KristofFPV on Jun 28, 2020

6  263  0

I finally built my own toothpick. It was supposed to be cheap, so I put it together with cheap parts that I had on hand. Board Crazybee F4 V2.0, Flysky version. Happymodel 1102 8500 kV motors. Eachine TX06 camera with 25mW power. The frame comes from Happymodel Sailfly, and the canopy from Happymodel Larva X. I fly on 2S batteries, 260-300 mAh.
Board Crazybe V.2.0 comes from Mobula 7. As you can see in the pictures in my project, it was placed upside down, so I had to reverse the accelerometer orientation in BF and change the mapping of the engines from left to right.
Weight about 35 g. Fast, agile and responsive. A nice park flyer :)



Sign in to comment

Guides & Reviews

39 4,032  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,827  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more