Apex Smoox

By M490fpv on Jul 10, 2020

22  660  6

Had to build a base apex frame with Caddx Vista system.
I printed some parts in lovely blue tpu. I just like this color a lot :)
I also designed a new 2 part GoPro Hero 7 mount. It holds the camera in place really well and looks awesome!
All parts here: https://www.thingiverse.com/thing:4540787

Photos

Part List

Frame

Apex 5" Base Frame Kit (10 builds)
Drone-fpv-racer.com
$118.31

Flight Controller

Iflight SucceX-D F7 TwinG V2.1 Stack (F7+50A ESC) (2 builds)
Drone-fpv-racer.com
$136.07

Motors

4 x Rcinpower Moteur SmooX 2306.5 1880kv (2 builds)
Drone-fpv-racer.com
$117.96

Propellers

HQProp ETHIX S5 Cinematic Props (10 builds)
Drone-fpv-racer.com
$4.13

FPV Camera

Caddx Vista HD System (9 builds)
Drone-fpv-racer.com
$195.28

Receiver

TBS Crossfire Nano RX (SE) (337 builds)
Drone-fpv-racer.com
$40.15
Show stores (1)

Discussion

Sign in to comment

jasperfpv   Jul 10, 2020  

Looks fantastic with the colour matching tpu parts and hope you can share the files later.

M490fpv   Jul 13, 2020 
Jodie Froster   Jul 12, 2020  
1

Stunning. What filament is that?

M490fpv   Jul 12, 2020 
1

Thanks! it is Fillamentum
Flexfill TPU 98A Blue Transparent

dafunk   Jul 12, 2020  

are these printed zip ties on the arms ?
Nice finish, worth trying printing same color as the motors/props

M490fpv   Jul 12, 2020 
1

blue zip ties are normal zip ties. black wire protectors are printed

Guides & Reviews

29 1,570  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,034  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more