MokaFrame Gravity (DLQ Style)

By DLQFPV (pothman) on Jul 17, 2020

14  313  2

MokaFrame Gravity 3-4 inch frame. It has folding arms and makes for a really small footprint. It's definitely a cruiser, not meant for hard freestyle or bando bashing. Added GPS and R9mm for midrange action.


Part List


Moka Gravity – mokaframe (2 builds)
See Site

Flight Controller

JHEMCU GHF411AIO F4 OSD Flight Controller Built-in 30A BL_S 2-4S 4in1 ESC for Toothpick (9 builds)


4 x DYS 1404 BE1404 4300KV 6000KV 2-4S Brushless Motor For RC Drone FPV Racing Multi Rotor (14 builds)


GEMFAN Hurricane 4024 2-BLADE 4" Durable PROP 4CW 4CCW (CHOOSE COLOR) (7 builds)

FPV Camera

Foxeer Arrow Micro Pro - 600TVL FPV Camera - Blue (12 builds)

FPV Transmitter

AKK FX3-ultimat 5.8G 40CH 25/200/400/600mW Switchable Smart Audio FPV Transmitter Support OSD (17 builds)


2pcs Foxeer Lollipop 85.5mm 5.8G 2.3dBi RHCP UFL Super Mini FPV Antenna Red/Black For RC Drone (73 builds)


FrSky R9MM Long Range 915MHz RC Receiver - Get Yours Today! - RMRC (105 builds)


CNHL MiniStar 14.8V 4S 450mAh 70C LiPo Micro Battery - XT30 (10 builds)


FrSky 2.4G ACCST Taranis Q X7 16 Channels Transmitter Remote Controller Black for RC Drone (218 builds)


Fat Shark Dominator V3 FPV Goggles (57 builds)

3D Printed

Moka Gravity 3 inch parts by mfazio_science
See Site

HD Camera

Runcam 5 - 4K Action Camera (16 builds)

HD Camera

Crosstour 4K Action Camera 16MP WiFi Underwater Cam 30M Waterproof Case Sports Camera with Remote Control 2 Batteries and 19 Mou
See Site

Misc Parts

BN-220 GPS Module TTL Dual GPS Glonass Navigation with Flash + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Beta

Video Receiver

Eachine PRO58 RX Diversity 40CH 5.8G OLED SCAN VRX FPV Receiver for FatShark Goggles (29 builds)

Radio Module

FrSky R9M 900MHz Long Range Transmitter Module for FrSky R9 Series (67 builds)

Battery Charger

ToolkitRC M8 DC 300W 15A Battery Balance Charger Discharger for 2-8S Lipo Battery (17 builds)


IFlight Backpack Case with Radio Transmitter FPV Goggle Motor and Support Hang RC Drone FPV Racing (8 builds)
Show stores (8)


Sign in to comment

kwadkenstine   26 days ago  

Cool build. Would love to see it as a 7 in octocopter

DLQFPV (pothman)   24 days ago 

Moka originally did have a 5-7 inch version, but he only sells this one now. but that would be a cool build

Guides & Reviews

29 1,491  11
23 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,980  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more