Hexsoon EDU450

By cjdavies on Jul 22, 2020

4  92  0

Playing around with the new 'Cube' range of Pixhawk flight controllers from Hex/ProfiCNC, using the EDU450 reference platform kit from Hexsoon (Hex + Donsoon) which comes with frame/motors/ESCs. First time seeing teardrop shape arms, really neat idea.

STL files for the 3D printed parts in this thread on the Ardupilot forum.


Part List


HEXSOON EDU450 - Frame Kit with Motors, ESC and PDB

Flight Controller

The Cube Orange - Standard Set with ADS-B Carrier Board

Misc Parts

Here 2 - GPS with CAN / Serial M8N
Show stores (1)


Sign in to comment

Guides & Reviews

28 1,454  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,948  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more