TinyTrainer HD with Caddx Vista

By CappyAmerica on Jul 30, 2020

13  451  0

TinyTrainer HD with Caddx Vista and Nebula Camera

Other than using 23mm standoffs to give room for the Vista, no other modifications were necessary. AUW 160 grams with 3s 530 mAh lipo. Will test with 4s after printing a bigger battery pouch.


Part List


TinyTrainer Frame Kit (5 builds)

Flight Controller

BetaFPV Toothpick F4 V3 2-4S AIO Whoop Flight Controller w/ 20A 4in1 ESC - XT30 (15 builds)


4 x iFlight Xing Nano X1404 4600Kv Micro Motor - Camo (22 builds)


GEMFAN 3016-3 PROPS - (2CW + 2CCW) (21 builds)

FPV Transmitter

Caddx Nebula Nano DJI HD FPV Kit (3 builds)


GNB 3S 11.4V HV 520mah LiPo Battery 80C XT30 LiHV (3 builds)

3D Printed

Caddx Vista BetaFPV Toothpick FC mount by Kenobinai
See Site


M2 Knurled Aluminum Standoff (5 Pcs.) - Choose Lenght

Misc Parts

Tiny Trainer LED Kit (4 builds)
Show stores (6)


Sign in to comment

Guides & Reviews

29 1,573  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,035  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more