6S Gecko

By Royal88 on Jul 31, 2020

13  374  1

This was my very first build, and pretty happy the way it came out. i decided to go with 6s because i felt i could turn it down but gain some extra flight times.
on the beta fpv 550mah 75c i get around 3-5 mins depending how i fly, and i also use 1000mah RDQ batteries which are much much heavier but i get about 12-15 mins cruising. i still need to tune this but im still learning. the light bluearm guards were 3d printed in engineering resin. the purple is sainsmart tpu.



Sign in to comment

tylerbradley2016   13 days ago  

that bio sexyyy

Guides & Reviews

29 1,573  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,035  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more