My mid/long range cinematic macro quad built for mountains and coast surfing. And it comes with DJI HD!

This is based on the Nasty405 V8 frame from Stand-In. Originally I was thinking about using XING 2814 1100kV motors, but finally decided to use Brotherhobby T5 3115 1050kV.

At first I was using iFlight PDB and iFlight ESC SuceeX 55A, but had way too many problems with this configuration:

• One ESC just died during bench testing
• I was keep getting a lot of error frames despite of using DSHOT125 8k/2k loop, motors were twitching on DSHOT600 8k/8k settings
• Two of ESCs just stopped working after LOS flight: they were super hot and motors were not spinning at all. After that they started to beep "No signal" pattern and resoldering only help until next LOS flight.

After switching to Holybro Tekko32 F3 65A and Matek XCLASS PDB it started to work like a breeze. I even noticed motors are spinning way smoother than with iFlight ESCs.

Update 2020/10/03
Noticed MAS propellers are causing too much vibrations and it's quite difficult to tune the quad. Moved to Aeronaut CAM 10x7 props, also got HQProp 10x5x3.

#standinquads