• About 211 grams AUW (incl. Insta360 GO) with a Tattu 4s 650mah
• The RotoriousFPV Zoot 3" frame has separate arms and weights about 30 grams fully assembled (without TPU)
• The flight time is about 3-5 minutes with a Tattu 4s 650mah
• The iflight 1404 (4600kv) are pretty good, the Brotherhobby VY 1504.5 (3950kv) may be better
• The Tattu 4s 650mah are cheap and accessible, but a GNB 4s 550/450mah may be better
• Running Betaflight 4.2 stock pids + hd preset, D min off
• I get the least amount of jello while using the HQProps 3x2.5x3
• I suspect the Motors are causing the jello (they are "notchy"), I may try the Brotherhobby VY 1504.5 in the near future
• A ND-filter could be a possible solution to solve the Jello-issue, too
• The TPU-mount for the Insta360 GO provides basic lens protection and secures the camera very tightly, no problems with over-heating so far
• Props are slightly in view, but the grey HQProps are not very noticeable
• The Insta360 GO is currently one of the best options for HD on a micro, but it has its flaws (image-quality, storage space and battery life)
• The "FPV Stabilization" of the Insta360 GO looks pretty nice

Update: Brotherhobby VY 1504.5 (3950kv)

• Stlighty heavier, about 216 grams AUW (incl. Insta360 GO) with a Tattu 4s 650mah
• Slightly shorter flight times
• Slightly "smoother"
• Still jello, but not very noticeable
• The HQProps 3x2.5x3 still work pretty good