feel free to ask questions
Frame |
FPVCycle BabyTooth Frame (CHOOSE THICKNESS)
(54 builds)
Fpvcycle.com
|
$12.49 |
Flight Controller |
FPVCycle 1S-2S AIO
(18 builds)
Fpvcycle.com
|
$55.99 |
Motors |
4 x FPVCycle Light 13mm 1S Motor- 2mm prop shaft
(40 builds)
Fpvcycle.com
|
$39.96 |
Propellers |
Gemfan 3018 Props (4CW + 4CCW) - 2mm
(45 builds)
Fpvcycle.com
|
$3.19 |
FPV Camera |
Caddx Ant Nano 1200TVL CMOS PAL/NTSC FPV Camera (1.8mm) - Choose Color & Aspect RatioSilver / 16:9
(134 builds)
Racedayquads.com
|
$17.89 |
FPV Transmitter |
Flywoo Goku VTX625 20x20/25x25/30x30 25-450mW 5.8GHz VTX - U.FLDefault Title
(13 builds)
Racedayquads.com
|
$15.99 |
Antenna |
Lumenier Micro AXII 5.8GHz U.FL FPV Antenna - Choose Your PolarizationLHCP
(59 builds)
Racedayquads.com
|
$19.99 |
Receiver |
FrSky R9MM OTA 900MHz Micro Receiver - ACCESS
(87 builds)
Racedayquads.com
|
$23.49 |
Batteries |
GNB 1S LiPo Battery 600mah XT30 (Three-Pack)
(8 builds)
Fpvcycle.com
|
$16.99 |
Hardware |
BeeBrain V2 Camera Mount and Canopy
(38 builds)
Fpvcycle.com
|
$2.99 |
Great build, but whats with the solid wires? Are they insulated at all?
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
So are those individual ESC's running to each motor?
Why do this when the zeez board has them already?
been thinking about putting some of those Video antenna on my 1s tp just wasnt sure if the weight was worth the change. im down in the 38g range.
The esc looking parts are just race wire just to look fancy mostly. Sadly I had an issue with horrible video noise on this build and it's just been sitting on the shelf since probably wont update with a video since most people seem to be doing fine don't want to be unfair sorry .
i would try to take those escs off and i havnt been using a capicator on 1s, not sure if that could be adding any interference but your wiring looks like the same on the same vtx i have one 1 build.