ESC, RX, GPS on the top equipment bay, the cover was glued, magnet removed. Bottom bay is kept as stock.
My favoutire motor flywoo 1404 4850kv is out of stock so I have to use Emax RS1306 2700kv - HQProp T5x3
I'm still consider to make it lighter with small battery 2s450s, simple aio camera & small motor... AUW< 200g
Inav autolaunch working pretty well.
Photos
Part List
Frame |
ZOHD Drift | ZOHD
Zohd.net
|
See Site |
Flight Controller |
20x20mm HAKRC MiniF4 F4 Flight Controller AIO Betaflight OSD & 5V 2A BEC Support INAV for RC Drone
(20 builds)
Banggood.com
|
$26.20 |
Motors |
4 x EMAX 1306 RS1306 Version 2 RS1306B 2700KV 4000KV Brushless Motor 3-4S For RC Drone Multi Rotor
(16 builds)
Banggood.com
|
$47.56 |
Propellers |
2 Pairs HQprop Toothpick Durable T5X3 5 Inch 5030 Propeller Grey Poly Carbonate for RC Drone FPV Racing
(8 builds)
Banggood.com
|
$3.08 |
FPV Camera |
Caddx Baby Turtle Whoop Version Nano FPV Camera / 26x26 1080P 60 FPS HD DVR - Black
(16 builds)
Racedayquads.com
|
$64.99 |
FPV Transmitter |
Team BlackSheep TBS Unify Pro32 Nano V1.1 5G8 Video Transmitter
(401 builds)
Airbladeuav.com
|
$29.99 |
Receiver |
TBS Crossfire Nano Receiver
(1507 builds)
Rotorgeeks.com
|
$32.93 |
Batteries |
DLG 7.4V 1300mAh 2S 25C Burst 50C LiPO Li-Po High-Discharge Rate Powerful Battery with Dean's T Plug
Amazon.ca
|
$36.99 |
impressively light! what kind of flight times are you getting powered? and powered+gliding?
It's around 15 mins I think, normally I spend 15-20 mins before work for relax flight in the morning. I've just removed the camera & vtx, and using a smaller esc so I can fit the small 2s 2500mah li-ion in there but don't have a chance to fly it yet.