Open Racer4 - 3D Printable DRL Racer4

By GreenMonkey Racing on Aug 31, 2020

14  705  1

Alt Tag
BUILD IT : https://openracer4.wixsite.com/the-project
GreenMonkey Racing is proud to present to you the first open-source professionnal racing drone!

The Open Racer 4 is made for race, inspired by the DRL Racer4, they share the same DNA and agility, but in a lighter and more powerful rig.
This drone is running in the world championship so you can be sure that the performances will be amazing!

You probably dreamed of having yours at home so we did it and it's open source!
We focused on the weight in particular because the original is not known for his weight and we succeeded to lowering the weight to less than 900 grams.

Photos

Discussion

Sign in to comment

IrieElectrics   14 days ago  

Built it!
Thanks for making this available!

Guides & Reviews

58 4,664  47
30 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,687  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more