4" TBS Podracer propelled by 1507 Rcinpower 4200 kv,
controlled by Fettec Kiss 4in1 35A and Fettec Kiss FC. Video connection with Caddx Vista Nebula.
AUW 280 grams with 850mah Tattu R-line.
Frame |
TBS Source PodRacer 4"
(2 builds)
Drone-fpv-racer.com
|
See Site |
Flight Controller |
FETTEC KISS F7 FC V1.2 20x20mm-30x30mm
(33 builds)
Pyrodrone.com
|
$71.99 |
ESCs |
FETTEC ESC 4IN1 - 6S 35A 20x20mm
(9 builds)
Pyrodrone.com
|
$59.95 |
Motors |
4 x Rcinpower Moteur SmooX Plus 1507 - 4200KV
(2 builds)
Drone-fpv-racer.com
|
See Site |
Propellers |
Gemfan WinDancer 4032 Tri-Blade 4" Prop 4 Pack - Choose Your Color
(8 builds)
Racedayquads.com
|
$2.99 |
FPV Camera |
Caddx Nebula V2 Nano Digital HD VTX Air Unit Kit for DJI
(47 builds)
Pyrodrone.com
|
$134.99 |
FPV Transmitter |
Récepteur FrSky R9 MM-OTA (EU)
Drone-fpv-racer.com
|
See Site |
Radio |
FrSky Taranis Q X7S Radio w/ Upgraded M7 Hall Sensor Gimbals (Carbon Fiber)
(25 builds)
Getfpv.com
|
$187.99 |
Goggles |
DJI Digital HD FPV Goggles
(145 builds)
Getfpv.com
|
See Site |
Misc Parts |
FETtec Spike Absorber
(8 builds)
Newbeedrone.com
|
$7.99 |
Radio Module |
FrSky R9M Module
(69 builds)
Pyrodrone.com
|
$49.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
I'm thinking of a similar build with the FETTec stack and the same motors but on 6S. Think I'll have any problems with the 2680kv version of the motors spinning the same props? They equate to a slightly lower RPM so I should be fine right?
These motors have a lot of power, you will appreciate them:)
On 4s I have 4 x 4.20V = 16.8V x 4200kv = 70560rpm.
On 6s, you will have 6 x 4.20 = 25.2V x 2680kv = 67536rpm.
You should be fine with the 6s kv setting as it is almost equal to 4s 4200kv.
Just consider a 6s battery will have more weight than a 4s.
I also tried the Gemfan 4052 on this setup. The quad handled sharp as a knife paired with ridiculous power.
Sweet thanks for the reply. I've never done a KISS build, the FETTec FC doesn't have an OSD right? Are you not using one? Or is it handled by DJI?
The OSD for Dji came with the new FETTec fc firmware. You can set UART 1 for Dji MSP.
But with analog, I am not really sure about the OSD. Are you planning to go for Dji or analog?
Analog for now. Hopefully going digital soon (waiting for holiday sales).