Yet another Trashcan revived from the dead. Replaced burned FC with Crazybee F4 v3 AIO on 85x frame. Painted with PlastiDip Blaze RED for better visibility. Added capacitor to the side for safety reasons. Bigger motors 1103 12000kv flies much faster on light 1935 props than the old ones. JESC firmware 48kHz and props out mod gives precise handling at the corners. Rear buzzer with RGB LEDs adds cherry on top. Flying on 2S GNB 450mAh.
Photos
Part List
Show stores (5)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Eh eh eh have almost the very same setup. I got rid of the trashcan canopy though...
For the 1935 you can use 2 little bit of floss and push on the props without screws. Works perfect and is a tiny bit lighter 😉
Thanks for the tip I definitely try that.
https://rotorbuilds.com/build/24627